AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Hialeah?
Furnace replacement in Hialeah typically runs between $2,800 and $7,200 for the equipment and installation, with most single-family homes landing in the $3,600 to $5,400 range. That’s an estimated figure for a standard-efficiency gas furnace swapped out at like-for-like capacity. Higher-efficiency equipment, a different fuel type, or duct and venting corrections push the total toward the top of that range or above it. The written estimate we provide after looking at your system sets the final price.
If you’re weighing a swap against another repair season, the two questions that decide it are the age and condition of the heat exchanger and what a repair would actually buy you in reliability. We run both furnace repair and furnace replacement, so the recommendation you get from Banner AC Repair is based on what the equipment needs, not on which job pays better. Call (866) 806-7345 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm covers Sunday through Friday.
Key Takeaways
- Typical furnace replacement in Hialeah: $2,800 – $7,200 installed, most jobs $3,600 – $5,400.
- A failed heat exchanger, cracked combustion chamber, or a system over 15 years old usually tips the decision toward replacement.
- Equipment choice matters more than brand name. We work on nine major brands and recommend by home size, efficiency goals, and budget.
- Free estimates, and the written estimate sets the final price, so you know the number before any work starts.
- Our technicians have up to experience across Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment.
Furnace Replacement Cost Breakdown (2026)
Here’s how a typical Hialeah furnace replacement breaks down. These are estimated ranges for the local market in 2026, not a quote for your home. Your actual numbers depend on the equipment you choose and what we find when we inspect the existing system.
| Line item | Typical estimated range |
|---|---|
| Standard-efficiency gas furnace (equipment only) | $1,400 – $3,200 |
| High-efficiency gas furnace (equipment only) | $2,600 – $4,800 |
| Labor and installation | $900 – $1,800 |
| New venting or flue work | $300 – $900 |
| Duct connections and transitions at the air handler | $200 – $700 |
| Electrical and gas connections, permits, and inspection | $250 – $650 |
| Thermostat replacement or reconnection | $120 – $450 |
| Total installed, typical range | $2,800 – $7,200 |
What pushes a job toward the top of the range? High-efficiency equipment, a size jump to a larger unit, and anything that requires reworking how the furnace vents. Homes in Hialeah where the furnace sits in a tight closet or an attic space with limited clearance can need extra labor to get the old unit out and the new one set. What keeps a job on the low end is a like-for-like swap: same fuel, same capacity, same venting path, and a duct system that already fits. When we can reuse the existing connections and the equipment closet is accessible, the number stays closer to the middle of the range.
If you’re replacing a furnace and your air conditioner is the same vintage, it’s worth pricing both together. AC installation in Hialeah typically runs $3,500 – $7,500 on its own, and combining the two means one set of connections, one inspection, and one team handling the whole system.
What Affects Furnace Replacement Pricing in Hialeah
Hialeah homes tend to be built for cooling first. The furnace is often a compact unit tucked into a closet, a hallway chase, or a utility space that was sized with a heat pump in mind. That shapes the job more than most homeowners expect.
- Equipment capacity and efficiency. A furnace sized for a small home costs less than one sized for a larger home, and an 80% unit costs less than a high-efficiency model. We size by the actual heat load of the house, not by whatever the old unit happened to be. Upsizing “just to be safe” is how homeowners end up with a furnace that short-cycles and a bigger bill.
- Fuel type and existing infrastructure. Most Hialeah homes with a furnace run on natural gas, but if the home has propane or electric resistance heat, that changes what equipment fits and what connections are needed. Converting fuel type adds cost because it isn’t just a swap.
- Venting path and flue condition. A high-efficiency furnace vents differently than a standard one, and if the existing flue or venting route can’t be reused, that’s extra work. Old flues in homes of any age are worth inspecting before you commit to equipment, since the venting decision can change the whole budget.
- Duct and return-air condition. We check the duct connections at the air handler and the return path. A furnace that’s been working against a restricted return airflow doesn’t perform well, and correcting it during a replacement is far cheaper than coming back later.
- Access and location. A furnace in an accessible closet is a straightforward job. A furnace in a tight attic space or behind finished walls takes more labor. This is one of the main reasons two homes of the same size can get different estimates.
- Permits and inspection. Most cities require a permit for a furnace replacement, so ask Hialeah’s building department what applies to your address. Permit and inspection costs are part of the line items above, and skipping that step to save money is a false economy.
One local reality worth knowing: because our winters are mild, the furnace here runs far fewer hours than it would up north. That means a furnace in Hialeah can look fine on the surface for years while the parts that matter for safety, like the heat exchanger, quietly rust through from condensation between heating seasons. A mild-climate furnace often fails from neglect, not overwork. That’s why we check the heat exchanger and combustion side carefully on every replacement call, not just the blower and the burners.
Repair or Replace? How We Decide
We run the repair numbers first. If a repair brings the unit back to safe operation at a fair price and the equipment has years of reliable service left, we say so. Replacement is the honest answer when one of these is true:
- The heat exchanger is cracked or corroded. That’s a safety issue, and a leaking heat exchanger can put combustion gases into the airstream.
- The unit is past its useful life and repair costs are climbing toward a meaningful fraction of a new system.
- Parts for the existing model are hard to source, which is common on older equipment from brands that have shifted their product lines.
- The furnace is undersized or oversized for the home, and no repair fixes a sizing problem.
Repair pricing on its own sits in a typical range of $150 – $700 for a Hialeah furnace call. If a repair would land near the top of that range on an aging unit, the smarter financial move is usually replacement, and we’ll show you both numbers so you can decide. Because we handle AC installation, furnace repair, and furnace replacement under one company, you’re not juggling separate contractors or getting a second opinion from someone with an incentive to sell you a system.
A word on safety
A furnace involves gas, combustion, and a heat exchanger that can fail in ways you can’t see. If you smell gas, hear odd noises from the combustion side, or your carbon monoxide alarm goes off, get out of the house and call your gas utility and emergency services first. Don’t attempt to diagnose or repair a gas furnace or its venting yourself. The heat exchanger, burners, and flue are work for a trained HVAC technician, and the stakes are too high to learn on your own equipment. We’re glad to inspect and advise once the immediate hazard is handled.
How to Save on Furnace Replacement
There’s no magic discount here, but there are real ways to keep the number down:
- Get a proper heat-load calculation, not a guess. A furnace sized correctly to your home costs less to buy and less to run than an oversized one. We size by the load, not by the old unit’s label.
- Compare like-for-like equipment. Standard-efficiency equipment is cheaper up front. High-efficiency models cost more but run leaner, and in a mild climate the payback math rarely justifies the top-tier model unless you have a specific reason. We’ll tell you when the upgrade isn’t worth it.
- Bundle the AC if it’s the same age. If your air conditioner is due for replacement, the single visit and shared connections save money over doing two separate jobs months apart. We handle both, so it’s one team and one inspection.
- Ask for a free estimate and read the line items. Our written estimate breaks out equipment, labor, venting, connections, and permit costs so you can see what’s driving the price. That’s the number that sets the final price, and you’re not committed until you’ve reviewed it.
- Choose a brand based on your home, not a dealership’s shelf. We’re brand-neutral. During consultation you choose from multiple manufacturers based on your home size, efficiency goals, and budget, rather than being steered toward one dealer’s preferred line. Nine brands, one standard of work.
To talk through your options, call (866) 806-7345. The estimate is free. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Know Before We Arrive: What the Replacement Visit Involves
Knowing the sequence helps you prepare and set realistic expectations. A furnace replacement in Hialeah usually takes most of a day, depending on access and any venting work.
- Assessment and measurements. We confirm capacity, inspect the heat exchanger, check the venting path, and measure the closet or attic space so the new unit fits.
- Equipment selection. You choose among compatible models in compatible sizes. We give you the size, efficiency, and brand options that fit the home, and you pick.
- Removal of the old unit. Gas and electrical are shut off and disconnected safely, then the old furnace comes out.
- Venting and connections. New venting is run if needed, gas and electrical are connected, and duct transitions are fitted to the new unit.
- Commissioning and testing. We run the furnace, check combustion and airflow, verify the thermostat, and make sure the system is heating as it should.
- Permit and inspection. Where a permit is required, that step gets scheduled and the installation is verified.
Because we work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment day in and day out, the technician usually already knows the model on hand before arriving. Whether your Trane heat exchanger needs attention or your Lennox system needs a full replacement, the diagnosis starts from familiarity with the equipment, not from learning it on your job. Our technicians have up to experience, and that depth across brands is what keeps the install clean the first time.
Why Hialeah Homeowners Call Banner AC Repair
We’re an HVAC-only company. That focus means every technician is a dedicated heating and cooling specialist, not a generalist with an HVAC add-on. Repair-or-replace clarity is the whole point: we run both the repair and the replacement, so the recommendation follows the equipment. And the full heating-and-cooling scope sits under one roof, with the same team handling installation, repair, and full system replacement for both air conditioning and furnace equipment. That’s the right answer, not the expensive one.
For a broader look at what we cover, see our Hialeah page. If you’re ready to price a replacement, call (866) 806-7345. Estimates are free, the written estimate sets the final price, and you’ll have the number before we start.
FAQs – Furnace Replacement Cost
How much does furnace replacement cost in Hialeah in 2026?
Furnace replacement in Hialeah typically costs between $2,800 and $7,200 installed, with most single-family homes landing in the $3,600 to $5,400 range. High-efficiency equipment, fuel-type changes, and venting corrections push the number toward the top. Call (866) 806-7345 for an exact quote. Estimates are free, and the written estimate sets the final price.
Is it cheaper to repair or replace my furnace in Hialeah?
It depends on the repair and the age of the unit, but a good rule is this: if a repair would cost a meaningful fraction of a new system and the furnace is past its useful life, replacement is cheaper over the next several years. Furnace repair in Hialeah typically runs $150 – $700, so a small fix on a solid unit is usually worth doing. A cracked heat exchanger can’t be safely patched, though, and that’s a replacement. Call (866) 806-7345 and we’ll price both paths so you can compare.
Can you replace my furnace the same day?
Same-day replacement isn’t guaranteed because equipment has to match your home, but we move fast on scheduling and many jobs turn around quickly. Call (866) 806-7345. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed on Saturday, so a furnace that fails then gets booked for Sunday.
Do I need a permit to replace a furnace in Hialeah?
Most cities require a permit for a furnace replacement, so ask Hialeah’s building department what applies to your address before work starts. Permit and inspection costs are included in the line items above. Skipping the permit to save money can cost more later. Call (866) 806-7345 and we’ll walk you through what your job needs.
What furnace brands do you work on?
We service and install Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That’s nine of the most-installed brands, which means our technicians usually know your model before arriving. Call (866) 806-7345 to confirm your equipment fits and get a free estimate.
Pricing reflects the Hialeah market as of 2026. Banner AC Repair offers free estimates – call (866) 806-7345.
Written by the team at Banner AC Repair.
What Our Customers Say
"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Shanice Carter"Drain line was clogged and the safety switch had shut the whole system down. Cleared it, flushed it, and installed a proper cleanout so I can pour vinegar through it myself once a season."
- Bryce Bennett"Two other companies told me I needed a whole new system. He put gauges on it, found a leak at a fitting on the line set, repaired it and recharged. That was 14 months ago and it's still holding."
- Rafael Guzman