AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Replacement for Hialeah Homeowners
A furnace that’s limping along on borrowed time is a problem you feel before you can name it. The heat comes up slow, the utility bill climbs, and somewhere in the back of your mind you know the next cold snap could be the one that finally kills it. In Hialeah, the cold snaps are short but they do come, and a January morning in the low 50s with no heat is a rough way to start the day.
Our technicians have up to 10 years of experience with residential heating equipment, and they work on the major brands that dominate South Florida homes. We handle furnace replacement as a scheduled, load-calculated job: we measure the home, right-size the new unit, order the equipment, and set a firm install date. You get a written fixed price before anything is ordered, and a number to call with questions. Call (866) 806-7345 to start with a free estimate.
What Our Furnace Replacement Service Includes
Furnace replacement isn’t a swap-the-box job. A properly sized replacement involves a load calculation, a duct inspection, combustion safety checks on gas equipment, and a clear line item for every part of the job. Here’s what the work covers when you book it with us.
Full System Assessment and Load Calculation
Before we recommend any furnace, we measure the home and run a heating load calculation so the new unit matches what the house actually needs. Oversized furnaces short-cycle, wear out early, and leave rooms uneven; undersized ones run nonstop and never quite catch up. We also check the existing ductwork, gas supply, venting, and electrical connections, because a hidden problem in any of those turns a straightforward replacement into a bigger job. Everything we find goes into the written estimate before you commit to anything.
Equipment Selection Across Major Brands
We work with Carrier, Daikin, Bryant, American Standard, Trane, Lennox, Goodman, Rheem, and York, and we’re not tied to any single manufacturer. That means the recommendation you get is based on your home’s size, your efficiency goals, and your budget rather than a dealership agreement. We’ll explain the trade-offs in plain terms: what a higher-efficiency unit actually saves in a Hialeah climate, what the price difference buys you, and where the mid-range options usually hit the sweet spot.
Removal and Safe Disposal of the Old Unit
Pulling out an old furnace safely means dealing with the gas line, the flue, and the electrical disconnect before the unit moves an inch. We shut off and isolate the gas supply, disconnect and cap the venting, and remove the old equipment without leaving a mess behind. Disposal is included as part of the job, and we haul the old unit away rather than leaving it on your curb.
Installation, Commissioning, and Safety Checks
Once the new unit is set, we connect the gas, venting, and electrical supply, then verify combustion with a combustion analyzer and confirm airflow against the manufacturer’s specifications. That commissioning step is where a lot of sloppy installs fail quietly: an improperly vented furnace or a wrong gas pressure setting is a real hazard, not just a performance issue. We check for gas leaks, confirm the heat rise is within range, and walk you through the thermostat settings and filter schedule before we leave.
Final Walkthrough and Paperwork
When the work is done, we run the system through a full heating cycle with you watching so you can see the airflow at each register and hear what normal operation sounds like. You get the equipment documentation, the written estimate as the final record of the price, and clear instructions on what to check if the system ever acts up. If there’s any permit paperwork your city requires for a furnace replacement, we’ll tell you what the process looks like so you’re not caught off guard.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Brands We Service for Furnace Replacement
We work on Carrier furnaces regularly and know where their heat exchangers and inducer assemblies tend to show wear. Daikin units have their own control and venting characteristics that a technician needs to understand before touching them, and we do. Whether your Carrier is ready for a new heat exchanger or your Daikin needs a full replacement, the technician arrives already familiar with the equipment.
We also service Trane, Lennox, Goodman, Rheem, York, Bryant, and American Standard equipment, with the same brand-specific knowledge across the board. Bryant and American Standard share engineering lineage with Carrier but differ in parts and diagnostics, and Goodman and Rheem show up in a lot of Hialeah homes where budget-friendly equipment was installed years ago. Whether you have a Carrier, a Daikin, or any other make on that list, we can help. If you’re weighing a repair against a replacement on one of these systems, our Banner AC Repair team can walk you through both options honestly.
Signs You Need Furnace Replacement Right Now
- Cracks or visible damage in the heat exchanger. A cracked heat exchanger can let combustion gases into the living space, which is a carbon monoxide risk, not a performance quirk. This is the one sign that warrants shutting the system down and calling rather than waiting it out. The repair is usually not cost-effective on an older unit.
- Repeated repairs on the same component. If the same blower motor, igniter, or control board has failed more than once, the underlying problem may be the unit itself rather than the part. At a certain point, repair money stops buying you reliability and starts funding a replacement one invoice at a time.
- Rising gas bills with no change in usage. A furnace that’s losing efficiency burns more fuel to produce the same heat. It’s a quiet signal that’s easy to miss because the house still gets warm, but the meter tells the story over a couple of billing cycles.
- Uneven heat and cold rooms. When some rooms roast and others stay chilly, the furnace may be undersized for the home or the ductwork may be leaking. A replacement with a proper load calculation can fix both problems at once; a straight swap won’t.
- The unit is old and parts are getting scarce. Furnaces past the manufacturer’s expected service life tend to fail at the worst possible time, usually the first cold morning of the year. If your technician has to source parts from specialty suppliers, replacement is usually the smarter spend.
Our Furnace Replacement Process – Step by Step
- 1
Free in-home estimate. We come out, look at the existing system, measure the home for the load calculation, and inspect the ducts, gas supply, and venting. You get a written estimate with line items, not a ballpark scribbled on a business card.
- 2
Equipment recommendation and fixed price. We walk you through two or three options across the brands we service and explain what each one buys you. You pick the unit, we confirm the written fixed price, and we set a firm install date before any equipment is ordered.
- 3
Equipment ordering and scheduling. Furnace replacement is scheduled work, not same-day work, because the unit has to be right-sized and ordered. We confirm the date, tell you what access we’ll need, and handle any permit coordination your city requires.
- 4
Removal, installation, and commissioning. On install day we isolate the gas, remove the old unit, set the new one, and connect gas, venting, and electrical. We then verify combustion with a combustion analyzer and check heat rise and airflow against the manufacturer’s specs.
- 5
Walkthrough and cleanup. We run a full heating cycle with you, leave the equipment documentation, and go over the filter schedule and what to watch for. We clean up the work area and haul the old unit away.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Hialeah?
Furnace replacement in Hialeah is a scheduled, load-calculated job, and the price depends on the unit’s capacity, efficiency rating, the condition of your ductwork and venting, and how accessible the install location is. A typical furnace replacement in Hialeah often falls in a range comparable to our AC installation pricing, $3500 – $7500, depending on the size of the system and the efficiency tier you choose. Smaller, simpler replacements sit near the low end; a larger home, a high-efficiency unit, or ductwork that needs sealed or reconfigured pushes the number up. We don’t quote numbers we can’t stand behind, so the written estimate is what sets the final price.
What affects the price most: the unit’s capacity in BTUs, its efficiency rating, whether the venting needs to be resized, and whether the existing gas line and electrical supply meet code. Accessibility matters too; a furnace tucked into a tight closet takes more labor than one in an open mechanical room. To avoid overpaying, get a written estimate with line items, confirm the load calculation was actually done, and make sure disposal and commissioning are included. Our free estimate covers all of it: the load calculation, the equipment options, and a clear breakdown of labor and materials with no obligation to book.
Furnace Replacement Near Hialeah – Our Service Area
We serve homeowners across Hialeah and the surrounding communities, including Hialeah, Hialeah Gardens, Miami Springs, Miami Lakes, Opa-locka, and the neighborhoods of Westview and West Little River, along with Biscayne Park and Bal Harbour to the east. Estimates are scheduled around the area, and once you book a replacement we set a firm install date rather than leaving you waiting. Response times for estimates vary with the week, so call and we’ll give you the next available window.
Serving Hialeah, FL – Our Local Coverage Area
We serve Hialeah and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Furnace Replacement in Hialeah
Furnace replacement means removing the old heating unit entirely and installing a new one, rather than repairing the existing equipment. It involves a load calculation to size the new unit correctly, disconnecting the gas and venting, removing and disposing of the old furnace, and installing and commissioning the new one. It’s different from a repair, which fixes a specific component, and from a tune-up, which keeps a working unit running efficiently. If you’re not sure which one you need, our furnace repair diagnostics can tell you whether repair is still the smarter call.
Most residential furnace replacements are completed in a single day, though the timeline depends on the home and whether ductwork, venting, or gas line changes are needed. Scheduling is the longer part: the unit has to be load-calculated, ordered, and in hand before install day, and we set a firm date once you approve the estimate. We’ll tell you at booking what access we need and roughly how long the install will take.
Furnace replacement in Hialeah is a scheduled job priced per home, and typical estimates for the work fall in a range comparable to our AC installation pricing, $3500 – $7500, depending on system size, efficiency tier, and whether venting or ductwork needs work. Simpler replacements land near the low end; a larger home or a high-efficiency unit lands higher. The written estimate sets the final price, with no surprises added later. Call (866) 806-7345 for a free estimate.
Yes. We work on Carrier and Daikin furnaces, along with Trane, Lennox, Goodman, Rheem, York, Bryant, and American Standard. Our technicians are familiar with the specific equipment on the truck before arriving, so diagnostics aren’t a learning curve. We’re not a single-brand dealer, so the recommendation you get is based on your home, not on what we’re pushing. Call (866) 806-7345 to book an estimate.
For an emergency repair we offer same-day service, and we answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday; we’re closed Saturday. Furnace replacement itself is scheduled work because the unit has to be load-calculated and ordered, so that’s a booked install date rather than a same-day visit. Call (866) 806-7345 and we’ll get you on the schedule.
The equipment manufacturer’s warranty and the labor terms are set out in the written estimate, and they vary by unit and manufacturer, so we spell them out on paper before you commit. We don’t promise a warranty term we haven’t confirmed for your specific equipment. Ask us during the estimate and we’ll show you exactly what’s covered and for how long.
Clear the area around the furnace and the access path so the technicians can move equipment in and out without obstacles. If the unit is in a closet or tight space, remove stored items from the surrounding shelves. Make sure an adult is home to let us in and walk through the final check; plan for a full day without heat while the swap is underway. Call (866) 806-7345 with any questions before install day.
Schedule Your Furnace Replacement Service in Hialeah Today
A furnace on its last legs doesn’t fix itself, and waiting for it to fail on the coldest morning of the year is a worse deal than scheduling the replacement now. Call (866) 806-7345 for a free, no-obligation estimate on furnace replacement in Hialeah. We’ll run the load calculation, show you the options across the brands we service, and set a firm install date. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Banner AC Repair.